- 117
- 542 869
DriftMagic
Приєднався 26 сер 2016
I have always posted and updated my S13 builds on forums and blog style format. It helped a lot of other enthusiasts out, which I enjoyed the fact that I could be of assistance as well as show my own build progress. This will be my 4th s-chassis build, but my first on youtube. Feel free to join me in my journey!
Mercedes C300 W205 722.9 Transmission Oil Change Flush DIY!
This service is recommended every 60,000 miles or 6 years, and is a definite must! If you want to save $1000 plus you can definitely do this on your own. I highly recommend a better fluid pump though lol. As you'll see i struggled with mine in the video. I purchased my service kit on FCP Euro and left a link to the kit I purchased below! *Note this is for the later model C300 and I have the early model. I double checked their site to see if there was an early model kit but no luck. The only difference is the bolts provided were too long compared to the bolts i had for my oil pan.
www.fcpeuro.com/products/mercedes-722-9-transmission-service-kit-liqui-moly-7229late
Follow me on Instagram! IG: Drift Magic
www.fcpeuro.com/products/mercedes-722-9-transmission-service-kit-liqui-moly-7229late
Follow me on Instagram! IG: Drift Magic
Переглядів: 177
Відео
2014-2021 W205 Mercedes C300 Spark Plug Service | M274 Motor
Переглядів 193Місяць тому
Quick and easy! Replacing the old and tired spark plugs on our Mercedes C300. This is on the 2.0 Inline 4 turbo (M274) motor. It may be similar on the other motors but I definitely recommend doing some research! Spark plug gap is .032 not .028 .028 will work but for maximum spark .032 is recommended by the factory service manual Follow me on Instagram! IG: Drift Magic
Vacation Mode! | Universal Studios Florida & Bahamas Cruise Royal Caribbean Allure of the Seas! PT1
Переглядів 782 місяці тому
Part ! This is a video ive been wanting to do on my channel and I finally did it lol. A travel/ day in the life video! We had such an amazing time on this trip, my whole family loved it. Beautiful sunny Florida weather, and gorgeous beaches in the Bahamas and Perfect day at Coco Cay. I have to say, travel vlogging is a lot harder than I thought. Editing this video theres a lot I wish i would ha...
W205 Drive Belt, Tensioner and Idler Pulley Replacement | 2015 2.0 Turbo Mercedes C300
Переглядів 3,9 тис.6 місяців тому
Had a noisy pulley that needed to be replaced. Glad I did because the belt was looking tired as well. Nice easy maintenance job which ended up not being my problem lol. I ended up replacing the alternator which ended up seizing not too long after this. This was a needed maintenance either way, but just for a heads up check your alternator pulley if your hearing noise as well! Follow me on Insta...
Project C6 Corvette Part 2 | The newer LS2 get dropped in! First Start!
Переглядів 1366 місяців тому
First start and sounds so good! Dad couldnt be happier. This was filmed last summer and since then has finally got an aftermarket exhaust, aero, and new wheels :) Check out my IG to see more photos of it looking so niceeee Follow me on Instagram! IG: Drift Magic
Building my Dad's Dream Car! |Project C6 Corvette Part 1
Переглядів 6266 місяців тому
So excited to be able to do this for my Dad. He's wanted a Corvette for so long but the prices for a decent one in good shape mechanically as well as cosmetically have been pretty hard to find. Luckily we found this super clean 06 C6 for a great price. Why so cheap? Rod knock! But that is where I come in. We picked up a donor LS2 with only 25k miles on it. So my mission is to pull the old LS ou...
300zx z32 Late Injector Install | 120k Timing Belt service DIY Part 4 Final Assembly | VG30DET
Переглядів 2,1 тис.7 місяців тому
Its done! Finally this series is complete! I wanted to make an in depth 120k service and I feel confident I got it done :) Hopefully this series helps you guys out on refreshing your VG30Det! Follow me on Instagram! IG: Drift Magic
300zx Z32 Cam/Crank Seal and Timing Belt replacement! | 120k Service DIY Part 3
Переглядів 3,1 тис.7 місяців тому
Moving right along with this 120k service! A lot of info to go over but we're getting things done! Timing belt and accessories, as well as valve covers and seals! Follow me on Instagram! IG: Drift Magic
300zx Z32 Intake Plenum Removal | 120K Service DIY Part 2
Переглядів 1,5 тис.7 місяців тому
Part two of possibly 4 videos on the full 120k maintenance service. In this video you'll see a detailed view on how to remove the intake manifold as well as deleting the water lines under the plenum. Follow me on Instagram! IG: Drift Magic
Z32 300zx Timing Belt 120K Full Service! | Super detailed DIY | Front Radiator, Crank Pulley Removal
Переглядів 2,1 тис.7 місяців тому
There are a few videos online but it felt like each video had little steps skipped here and there. In this series I tried to be as detailed as possible. And from A-Z on this service including the timing belt, pulleys, water pump, vtc springs and seals, valve cover gaskets, fuel injectors and more! Stay tuned next week for the part 2 of this series! Shout out to my buddy Josiah for providing me ...
I found her! | My 1990 Nissan 300zx Z32 2+0!
Переглядів 3648 місяців тому
Finally found what I was looking for. A super clean example of the Nissan 300zx 2 0. Yes its auto but dont worry, things are coming lol. N/a but that also doesnt matter as much because LS things if you know what i mean lol Follow us on Instagram! IG: Drift Magic
Mishimoto Rad & Spal Fan Mock up! | S14 RB25DET NEO Build
Переглядів 5068 місяців тому
Finally taking out the mishi rad out of the box! One year later lol, purchased this thing on black friday 2022. Crazy how much prices went up after one year even after BF deals. Follow me on Instagram! IG: Drift Magic
240sx S14 Rear Wheel Bearing Replacement | Rear Differential Removal and Reseal
Переглядів 6518 місяців тому
More progress on the RB S14! Before taking out the Ka she made a horrible howling noise in the rear driver side. Safe to say it was definitely the wheel bearing. I also get a surprise with the rear diff, had no clue it wasnt an open differential. Didnt drive it long enough to notice lol. Part number for Differential Lower Washer - 55482-60U1A Follow me on Instagram! IG: Drift Magic
S-Chassis + Blitz 03 Wheels | The Combination You Cannot Beat!
Переглядів 3268 місяців тому
Blitz wheels may be the hype wheel of our time, but man... they do look amazing! Especially on an S-Chassis! Just a small update video. Also a few stills I captured at the end of the video. Enjoy! Follow me on Instagram! IG: Drift Magic
Rb25 Neo S14 Motor Drop in Part 2!
Переглядів 4428 місяців тому
Shes finally in! Well she's been in, this video is just super late lol. Such a process getting this in. Not sure why, this is my 3rd RB swap and for some reason this was the most difficult. Regardless, she sitting nice now and we can finally start plugging everything in! Not to mention this motor has always looked great in the S chassis haha Follow me on Instagram! IG: Drift Magic
RB25 Neo finally get dropped in! | Spec Stage 2 Clutch w/ Kevlar Disk install!
Переглядів 4919 місяців тому
RB25 Neo finally get dropped in! | Spec Stage 2 Clutch w/ Kevlar Disk install!
Custom RB26 Valve Covers for my RB25 NEO S14 | Instant Visual Upgrade!
Переглядів 1,5 тис.9 місяців тому
Custom RB26 Valve Covers for my RB25 NEO S14 | Instant Visual Upgrade!
240sx S14 Works Bell Steering Wheel Hub Adapter Install || Full DIY including SRS delete
Переглядів 5 тис.Рік тому
240sx S14 Works Bell Steering Wheel Hub Adapter Install || Full DIY including SRS delete
She's Alive!!! || S14 Kouki Sr20det Swap First Start
Переглядів 2 тис.Рік тому
She's Alive!!! || S14 Kouki Sr20det Swap First Start
S14 Kouki SR20DET is in! || SR Swap Part 2
Переглядів 8962 роки тому
S14 Kouki SR20DET is in! || SR Swap Part 2
SR Notch Swap Time!!! || Kouki S14 says goodbye to the KA24
Переглядів 3752 роки тому
SR Notch Swap Time!!! || Kouki S14 says goodbye to the KA24
S14 Kouki BC Coilover Install | Saying Goodbye So Soon!?
Переглядів 4972 роки тому
S14 Kouki BC Coilover Install | Saying Goodbye So Soon!?
Bringing Home One Of The Cleanest Kouki S14 Around! || 1997 Nissan 240SX
Переглядів 6 тис.2 роки тому
Bringing Home One Of The Cleanest Kouki S14 Around! || 1997 Nissan 240SX
Mazda RX8 Clutch Replacement PART 2 | Renesis Rotary Build Series
Переглядів 2,6 тис.2 роки тому
Mazda RX8 Clutch Replacement PART 2 | Renesis Rotary Build Series
Mazda RX8 Clutch Replacement! Clutch disc was gone! || Renesis Rotary Build Series
Переглядів 4,8 тис.2 роки тому
Mazda RX8 Clutch Replacement! Clutch disc was gone! || Renesis Rotary Build Series
Bringing Home ANOTHER RX8!! || His and hers Mazda RX8 Rotary Builds!
Переглядів 5702 роки тому
Bringing Home ANOTHER RX8!! || His and hers Mazda RX8 Rotary Builds!
Carbon Splitter Refresh! || Can we bring it back?? Clean, sand and refinishing DIY
Переглядів 1432 роки тому
Carbon Splitter Refresh! || Can we bring it back?? Clean, sand and refinishing DIY
Rev9 RB25 - RB20 T3 Top Mount Turbo Manifold || S14 RB25DET Build Series
Переглядів 8 тис.2 роки тому
Rev9 RB25 - RB20 T3 Top Mount Turbo Manifold || S14 RB25DET Build Series
RX8 gets a refreshed for a clean start! || Ep.2 Her RX8 Build is ready to begin!
Переглядів 1762 роки тому
RX8 gets a refreshed for a clean start! || Ep.2 Her RX8 Build is ready to begin!
Turning a new leaf and exploring the Rotary World! || Her Mazda RX-8 Rotary Build Series!
Переглядів 3702 роки тому
Turning a new leaf and exploring the Rotary World! || Her Mazda RX-8 Rotary Build Series!
Just picked up a 93 NA with 92k miles and no record of ever having timing belt done. Planning on doing the 120k service to be safe, this is by far the best video series i have found and you earned a sub for that alone! Huge Thank you for this.
Thank you! I hope this helps you out with your z! Congrats on it btw!
Beautiful!
What kind of modifications did you have to do to the OEM RB26 covers to work with the RB25?
Great vlog! People don’t realize vlogs like this require tons of work and especially when editing! Glad it came out great and you guys had a blast! 😎🤙🏼
Awesome job!!!
Thanks for showing us this bro🙏🏼🔥 I fuck with Flexx Garage content too. Beast ass C300’s💯
Great job my man! I need to get this done this weekend. Appreciate the video and appreciate you helping the w205 community. 😎🤙🏼
Ayyyy! Ty bro!
I have the same vehicle and will be lowering also, but I'm gonna stuff 20s in there! Thanks for the information!
did you cut a hole on the front piece by yourself or are there parts that comes with holes? All i find is without the hole
Yes I ended up cutting the hole myself. The Rb26 front cover does not originally come with that
Whoa
Hello whats the torque specs for pulley and tensioner
is it possible to install, rb26dett engine valve on rb25det neo, please, if yes what are the modifications that i should be doing, i can not find a single page about it, please
is it possible to install, rb26dett engine valve on rb25det neo, please, if yes what are the modifications that i should be doing, i can not find a single page about it, please
Yes you can, this is a common modification on the rb30 block. It bolts directly on
@@DriftMagicThank you so much!!!! Do you have a parts list of your build by chance? I can pay for the intel (50Usd)
You have any videos of.installing the rb25det into the 240sx s13? Looking to do mine soon and doing my research ahead.of time
Bro love i found your channel
Can you change out my spark plugs
Oh
What’s the torque ft/lbs for the spark plugs?
What size serpentine belt did you use? For the Mercedes-Benz C3 00 I have a C3 hundred Mercedes 2016. I bought aftermarket serpentine belt and it does not fit at all. Please let me know what size to use.
hey man quick question, what did you end up doing for throttle cable? my actual cable isn't long enough for the throttle body. got an S14 cable (longer) but having the same issue, the actual cable isn't long enough
I’m still figuring that part out lol. I can’t remember if it was the maxima throttle body that was longer.
@@DriftMagic Keep me posted boss! If I figure out a solution I will ping you to let you know. Keep up the good work!
Where did you buy the replacement kit?
I ordered oem parts from eBay. You can also find them on Amazon
That was the serpentine belt correct?
Drive belt/serpentine belt yup!
What a beauty, what an amazing find!
Thank you! I appreciate it!
hello great vid, is it the same procedures with the 2019 c300 w205 m264 engines?
DR SUESS 30MIN WAIT!!!!
DR SUESS STUPID LITTLE RIDE😂
😂😂😂
Where's the next part?
Still editing it lol
😭
hey m8, how do you fit rb26 covers on a rb25? is it a direct fit or do you need to mod anything?
Direct fit! Even the gaskets are the same as the 25 😂
@@DriftMagic wow aiiit, cheers for the reply m8!
I heard you had to move the cam cover bolts from front to rear with them being different lengths?
dawg a z32 AND an 848. Thats my dreammmm. tt swapping my z rn. then imma sell my monster and buy an 848 next. LIVIN MY DREAM FR
Don’t forget my wrx, rsx , rb25 s14 and my sr s14 😂
Man if you lived in NC, I would bring you my 1992 twin turbo for that same job..
Thanks for this video. doing this right now to my s13 rb25det
Did the tensioner need to be held open to get the belt on?
When it’s brand new there’s a pin that keeps the tension off of it until you’re ready to pull the pin
Hey man what are these wheel specs? Planning to do a RB Kit on my 89 r32 GTST Rb25det swapped
I’m sorry bro it’s been so long and I sold that car awhile ago. I can’t remember the wheels specs for the life of me! Sorry!
This makes me want to do that wing to my r32 GTST and I’ll want to rocket bunny it aswell I think it will suit this wing also
What was the bolt size for that bigger hole?
Are these the 26mm or the 30mm calipers ?
These ones specifically are 30mm, but the process is the same for both
where’d you get the BOV adapter?
3:13 what bumper is that?
Oem JDM bumper with greddy style lip
this video would have been very handy 6 months ago HAHA. Great work!
Haha sorry I was late!
Is fixing this car similar to the cla45 amg 2016? Same issue
Good vid. Good content. Clear instructions. Thank you.
But what is with the passenger airbag? I want to remove and delete it also.
Dude the marks are off by like a teeth all of them
lol it probably looks like that on video. But looking straight on they are perfectly aligned. Skip to the last video of the series and listen to her start up. Timing is on point with my timing light as well. If it was truly off she would run horribly if at all
What kit/s did you all use
I found out that piecing everything together was a lot cheaper than the kits available
@@DriftMagic ahhh. Okay. I'm watching everything and just trying to remember all the little things you said you were replacing and making sure I'm getting those.
With this setup, does the turn signal switch feel 'out of reach'?? In comparison to the oem feel? I am trying to decide whether to get the full-length boss kit or the short hub version, as for me, i hate 'reaching' for the turn signal switch. I'll be getting a very similar wheel.
If you get a deep dish steering wheel you’ll have to reach for sure. It feel like oem with a flat steering wheel
@@DriftMagic much love brother! thanks for the reply.
No worries!
Happen to have a video for the alternator install? Thanks
Thanks so much I have a 1990 Honda Accord a little different but still got it working after 6 months
This fucks!! Looks AWESOME!! I'm gonna do mine now, thanks! 🔥🔥
Класс
Could an oil accumulator be put to one of those fittings for the sensors?
Do you have the measurement of the barb and NPT of the two hose brass fittings? I am going to buy that intake and wanted to order those fittings right away i know you said that 1 of the fittings is 1/8 NPT
Do you have a link where to buy that turbo?
Odd my h&r springs lowered my car in the rear almost like 1.5 inches and does not rub.